NDT Technician (PAUT) in a Fast-growing Indigenous Upstream, Mid-stream and Downstream Oil and Gas Company

They are currently expanding with some pipeline projects around the country, and they are recruiting to fill the position below:

Job Title: NDT Technician (PAUT)

Locations: Akwa Ibom, Delta, Imo, and Rivers
Employment Type: Full-time
Reports to: Construction Manager

Key Responsibilities

• Carry out and supervise all tasks at or below Level II and report the results of non-destructive tests. Level III: An individual certified to Level III has demonstrated competence to perform direct NDT operations for which certified. The Level III shall be competent with the following: Evaluate and interpret results in terms of existing standards, codes and specifications.
• Prepare and verify that tests, controls, and Inspections are carried out according to the Quality Control Plan, Inspection Test Plan, and the Mechanical Completion Approval.
• Perform the assigned tasks with due diligence regarding the Integrated Management Systems of the Company.
• Ensure appropriate NDT standards, procedures and specifications are in place during the NDT execution activities.
• The technician will typically complete NDT inspection works at the Pipeline Project’s site. Remote site inspections are undertaken at onshore/offshore facilities.
• General familiarity across other NDT methods; Where applicable, assume technical responsibility for facility NDT staff; Establish, review for editorial and technical correctness, and validate NDT instructions and procedures; designate the particular test methods, techniques and procedures to be used within the scope and limitations of any certification held; carry out tasks at all levels; and Provide supervision and guidance for NDT personnel at all levels.
• Initiate non-destructive testing (NDT) requests and monitor and review examination results to determine defects, corrosion, or blockages and make recommendations for repairs or replacement as required.
• Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems.
• Non-Essential: Safety: Ensure that the Safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment.
• Within the scope of the competence defined on the certificate, Level I personnel may perform the following with NDT instructions: Set up NDT equipment; Perform/conduct the tests; Record and classify the results of the tests according to written criteria; and populate a report under supervision. Level II: An individual certified to Level II has demonstrated competence to perform NDT according to NDT procedures.
• Review NDT test reports and Radiography films prior to sharing with QC personnel for any issue/defect.
• Preparation of Phased Array Ultrasonic Testing with reference to construction activities.
• Has sufficient practical knowledge of applicable materials, fabrication, process, and product technology to select NDT methods, establish NDT techniques, and assist in establishing acceptance criteria where otherwise are not available.
• Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment.
• An individual certified to Level I has demonstrated competence to carry out NDT according to written instructions and under the supervision of Level II or Level III personnel.
• The NDT Technician is responsible for using a range of analysis techniques used in the Inspection Industry to evaluate the properties of a material, component, or system without causing damage.
• Within the scope of the competence defined on the certificate. Level II shall be competent in: select the NDT technique for the test method to be used; define the limitations of application of the testing method; translate NDT code, standards, specifications and procedures into NDT instructions adapted to the actual working conditions; Set up and verify equipment settings; Perform and supervise tests; Interpret and evaluate results according to applicable standards, codes specifications or procedures; Prepare written instructions.

Requirements

• In-depth knowledge of international specifications, Such as ASM B31.3, ASME B16.5, API 650, etc.
• Diploma in Engineering with a minimum of 2 years of hands-on experience in PAUT field testing.
• In addition to the bullet points listed in functions, the NDT Technicians should have knowledge of: The various NDT techniques available, how, when, and why to use each technique; Writing of worksheets and reports; Safety standards / HSEQ / Step back 5 x5 and JSEA; and NATA Requirements.

Desired Knowledge, Skills, Abilities, and Other Characteristics:

• Should be well-versed with NDT techniques and awareness about codes, standards, safety, and environment standards.
• Must be certified in PAUT
• NDT Level-II in Radiography / DPT / MPT and UT technique.